Difference between revisions of "RFM12"
(→Working Mode) |
|||
(4 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
{{i18n|RFM12}} | {{i18n|RFM12}} | ||
+ | |||
+ | RFM12 is a low costing ISM band FSK transceiver module implemented with unique PLL. It works signal ranges | ||
+ | from 315/433/868/915MHZ bands. The SPI interface is used to communicate with microcontroller for parameter | ||
+ | setting. | ||
+ | |||
+ | Features as listed on the [http://www.hoperf.com/ manufactures] site: | ||
+ | * low costing, high performance and price ratio | ||
+ | * tuning free during production | ||
+ | * PLL and zero IF technology | ||
+ | * fast PLL lock time | ||
+ | * high resolution PLL with 2.5KHz step | ||
+ | * high data rate (up to 115.2 kbps with internal demodulator) | ||
+ | * differential antenna input | ||
+ | * automatic antenna tuning | ||
+ | * Programmable TX frequency deviation (15 to 240 KHz) | ||
+ | * programmable receiver bandwidth (67 - 400 kHz) | ||
+ | * analog and digital signal strength indicater(ARSSI/DRSSI) | ||
+ | * AFC | ||
+ | * DQD | ||
+ | * Internal data filtering and clock recovery | ||
+ | * RX synchron pattern recognition | ||
+ | * SPI interface | ||
+ | * clock and reset signal output for external MCU use | ||
+ | * 16 bit RX Data FIFO | ||
+ | * Two 8 bit TX data registers | ||
+ | * 10MHz crystal for PLL timing | ||
+ | * wakeup timer | ||
+ | * 2.2V - 5.4V power supply | ||
+ | * low power consumption | ||
+ | * stand by current less than 0.3µA | ||
+ | |||
+ | |||
+ | |||
+ | == Connection == | ||
[[Image:Rfm12-chip.jpg]] | [[Image:Rfm12-chip.jpg]] | ||
+ | |||
+ | Detailed information can be found in the [http://www.mikrocontroller.net/articles/RFM12 Miktrocontroller Forum] (German). | ||
+ | |||
+ | == Working Modes == | ||
+ | |||
+ | For the working modes of the RFM12 Ethersex provides the modules [[RFM12_FSK|FSK]], [[RFM12_ASK|ASK]], and [[RFM12_FS20|FS20]]. | ||
+ | |||
+ | [[Category:RFM12]] |
Latest revision as of 07:56, 11 March 2013
RFM12 is a low costing ISM band FSK transceiver module implemented with unique PLL. It works signal ranges from 315/433/868/915MHZ bands. The SPI interface is used to communicate with microcontroller for parameter setting.
Features as listed on the manufactures site:
- low costing, high performance and price ratio
- tuning free during production
- PLL and zero IF technology
- fast PLL lock time
- high resolution PLL with 2.5KHz step
- high data rate (up to 115.2 kbps with internal demodulator)
- differential antenna input
- automatic antenna tuning
- Programmable TX frequency deviation (15 to 240 KHz)
- programmable receiver bandwidth (67 - 400 kHz)
- analog and digital signal strength indicater(ARSSI/DRSSI)
- AFC
- DQD
- Internal data filtering and clock recovery
- RX synchron pattern recognition
- SPI interface
- clock and reset signal output for external MCU use
- 16 bit RX Data FIFO
- Two 8 bit TX data registers
- 10MHz crystal for PLL timing
- wakeup timer
- 2.2V - 5.4V power supply
- low power consumption
- stand by current less than 0.3µA
Connection
Detailed information can be found in the Miktrocontroller Forum (German).
Working Modes
For the working modes of the RFM12 Ethersex provides the modules FSK, ASK, and FS20.